Paint Hog® Fiberglass Paint Arrestor

Paint Hog® 30 is a new breed of paint exhaust filtration media.

Paint Hog® is highly compressible which saves shipping and warehousing costs.
It has best in class paint holding capacity, high efficiency, and low resistance – resulting in lowest overall operating costs.

Versatile Application Uses

Paint Hog® is recommended as a 1st stage filter for most Automotive and Industrial applications.
The fiberglass media works best with:

  • High Solids Paint
  • Water-Borne Coatings
  • Epoxy/Urethane Primers
  • Oil Mist
  • Wood Stains/Vinyl Lacquer

Available in Rolls, Blankets, and Pads.

UL Classified

Paint Hog® fiberglass is UL Classified for flame exposure requirements.  The fiberglass material content is California Proposition 65 Compliant.


  • Density: 30grams per square foot
  • Thickness: ±3 inches
  • Initial Resistance (Clean): 0.03 in. water
  • Final Resistance (Loaded): 0.11 in. water
  • Holding Capacity: 2832.7 grams (4.9 lbs.)
  • Average Efficiency: 99.25%
  • Length: 200’ (width varies)
  • Downstream Side: Red

Test results are based on 40 CFR Part 63 National Emission Standards.